cancel
Showing results for 
Search instead for 
Did you mean: 
CableGuy
New Contributor

Signum Cable management system screw choices

Solved Go to answer

I purchased Signum Cable Management rack and want to attach to Lagkaptan Table Top that is 1 3/8 inches thick. The rack instructions are not very clear on whether or not to use just the screws or the plugs and screws. I believe the measurements shown for table thicknesses are incorrect.

1 Solution
AlvynA
Moderator
Moderator

Solved Go to answer

Hej  @CableGuy! Thanks for asking. If your tabletop is thicker than 2.1 cm, you should use both parts below:

4f251d634a6886d81cfeacb03cc9de8a.png

If not, just the right screw will do. We hope this helps!


Found your solution? Simply click on Accept as solution to help others with similar questions!

View answer in original post

1 Reply 1
AlvynA
Moderator
Moderator

Solved Go to answer

Hej  @CableGuy! Thanks for asking. If your tabletop is thicker than 2.1 cm, you should use both parts below:

4f251d634a6886d81cfeacb03cc9de8a.png

If not, just the right screw will do. We hope this helps!


Found your solution? Simply click on Accept as solution to help others with similar questions!