BROR work bench measurements

[home123]

Hello,

We're trying to figure out what will fit on the shelves of the BROR work bench. What is the distance between hole centres (of the posts where the shelves attach) and how thick are the shelves (at the front)?

Thanks!

[smnc]

Does this help?

 

[home123]

Hi there, thanks for the response! I only see an image of a triangle. Looks like image uploads aren't working... I tried viewing in Chrome, Firefox and Safari but no luck.

[smnc]

This happened to be previously, where the system had a few hour delay before uploaded pictures would show up.
I shared the picture from here: https://www.ikea.com/ca/en/images/products/bror-work-bench-black-pine-plywood__0940900_pe795231_s5.j...

[smnc]

Aaaannnnnd now that your photo is loading for me, I can see I just posted the same picture as you.

🤦‍

[FJÄLLBO · Accepted solution]

Hej there!

Had to do some deep digging for you, but I found the exact measurements you’re inquiring about. There is a 400 mm distance between the screw holes you highlighted in the photo. Additionally, the vertical width of the shelf is 50 mm.

Hope this helps!

[home123]

Thank you! This was very helpful